Page 98 - Fire Suppression General Products Catalog, Automatic Sprinklers, System Valves and Devices, Piping and Electrical Products
P. 98

 Fire Suppression General Products Catalog
 CPVC Pipe & Threaded Fittings
CPVC Pipe
Sprinkler Pipe
Fittings
Rapid Seal Adapter (RSA) Fittings
Always refer to the product’s Technical Data Sheet for a complete description of all Listing and Approval criteria, design parameters, installation instructions, care and maintenance guidelines, and our limited warranty.
98
      Sizes
3⁄4" thru 3" (DN20 thru DN80)
   Pipe Length
10’ and 15’ Lengths
   Approvals
UL, C-UL Listed & FM,MEA, NSF, & LPCB Approved
  Rated Pressure
Maximum Temperature Rating
175 psi (12,1 bar)
   150°F (65°C).
  Tech Data Sheet
TFP1915 and
Installation Handbook - IH-1900
   Manufactured with Lubrizol's BLAZEMASTER® compound • Produced from BlazeMaster® thermoplastic compound, RAPID RESPONSE CPVC pipe is designed exclusively for use in wet and dry pipe automatic fire sprinkler systems. • Our CPVC pipe is easier to install than traditional steel components, while providing superior heat resistance and strength compared to traditional CPVC and PVC piping materials. • TYCO CPVC sprinkler pipe conforms to the requirements of ASTM F442 and is produced to SDR 13.5. SDR (Standard Dimension Ratio) is the ratio of the outside pipe diameter to the wall thickness of the pipe.
       Sizes
3⁄4" thru 3" (DN20 thru DN80)
   Approvals
UL, C-UL Listed & FM,MEA, NSF, & LPCB Approved
  Rated Pressure
Maximum Temperature Rating
175 psi (12,1 bar)
  150°F (65°C).
  Tech Data Sheet
TFP1915 and
Installation Handbook - IH-1900
   Manufactured with Lubrizol's BLAZEMASTER® compound • Produced from BlazeMaster® thermoplastic compound, RAPID RESPONSE CPVC fittings are designed exclusively for use in wet and dry pipe automatic fire sprinkler systems. • Our CPVC is easier to install than traditional steel components, while providing superior heat resistance and strength compared to traditional CPVC and PVC fitting materials. • Tees, Crosses, Reducing Tees & Crosses, 90° Elbows, 45° Elbows, Couplings, Bushings, Caps, Sprinkler Head Adapters, Grooved Coupling Adapters, Female and Male Adapters, Sprinkler Adapter Tees, etc...
       Sizes
3⁄4" thru 1" (DN20 thru DN25)
    Pipe Thread Connection
1/2" NPS
   Approvals
UL, C-UL Listed & FM, & LPCB Approved
Certified to all requirements of NSF/ANSI 61, Annex G
  Rated Pressure
175 psi (12,1 bar)
   Maximum Temperature Rating
150°F (65°C).
  Tech Data Sheet
TFP1925 and
Installation Handbook - IH-1900
   Rapid Seal Adapter (RSA) Fittings are intended for use in fire protection sprinkler systems comprised of CPVC pipe and fittings.
A gasket housed within the fitting eliminates the need to apply sealant to sprinkler threads and reduces the effort necessary to complete a leak-free installation. • No need for thread tape or sealant • No brass, no lead, no dezincification • Thanks to its brass-free design, Rapid Seal is not prone to dezincification in hard water environments and also complies with growing state and federal low- lead requirements for sprinkler and plumbing systems. • 90° Elbow, Straight Adapter, Spigot
    
















































   96   97   98   99   100