Page 95 - Fire Suppression General Products Catalog, Automatic Sprinklers, System Valves and Devices, Piping and Electrical Products
P. 95

 www.tyco-fire.com
 Grooved Fittings
Elbows, Tees, Reducers, Caps, Crosses and Flange Adapters
Grooved Piping Products
     Sizes Range
1" x 12" (DN25 x DN300)
   Approvals
UL, ULC Listed & FM, VdS, & LPCB Approved
    Maximum Working Pressure
300 psi (20,7 bar)
  Tech Data Sheet
Provide an economical and efficient method of changing direction, adding an outlet, reducing or capping grooved piping systems • Cast grooved fittings provide full flow characteristics • Full back stop behind the groove to ensure proper coupling engagement and rigidity • 90° elbows and tees are also available in the “short pattern" style • Available painted or galvanized finish
TFP1815
           Figure 510S
Short Pattern 90° Cast Elbows Sizes 2" thru 8" (DN50 – DN200)
     Figure 510
90° Cast Elbows
Sizes 1" thru 12" (DN25 – DN300)
    Figure 510DE
90° Drain Elbows
Sizes 2" thru 8" (DN50 – DN200)
   Figure 501
45° Cast Elbows
Sizes 1" thru 12" (DN25 – DN300)
   Figures 512 & 312
22-1/2° Elbows
Sizes 1-1⁄4" thru 12" (DN32 – DN300)
     Figures 511 & 311
11-1⁄4° Elbows
Sizes 1-1⁄4" thru 12" (DN32 – DN300)
    Figure 519S
Short Pattern Tee
Sizes 2" thru 8" (DN50 – DN200)
     Figure 519
Tees
Sizes 1" thru 12" (DN25 – DN300)
      Figure 320
Groove x Groove x Male Thread Reducing Tees
Sizes 1" thru 12" (DN25 – DN300)
   Figures 221 & 321
Reducing Tees
Sizes 1-1⁄4" x 1" thru 12" x 10"
(DN32 x DN25 thru DN300 x DN250)
  Figure 323
Groove x Groove x Male Thread Reducing Tees
Sizes 2" x 3⁄4" thru 12" x 10"
(DN50 x DN20 thru DN300 x DN250)
   Figures 391, 392, & 393
Adaptor Nipples
Sizes 1-1⁄4" thru 12" (DN32 – DN300)
    Figure 372
Reducers, Small End Threaded (Male) Sizes 1-1⁄2" x 1" thru 6" x 5"
(DN40 x DN25 thru DN150 x DN125)
     Figures 250, 550 & 350
Concentric Reducers
Sizes 1-1⁄4" x 1" thru 12" x 10"
(DN32 x DN25 thru DN300 x DN250)
    Figures 327 Fabricated
Crosses
Sizes 1" thru 12" (DN25 – DN300)
      Figures 260 & 360
End Caps
Sizes 1" thru 12" (DN25 – DN300)
     Figure 341 & 342
Flange Adapters
Sizes 1" thru 12" (DN25 – DN300)
   Always refer to the product’s Technical Data Sheet for a complete description of all Listing and Approval criteria, design parameters, installation instructions, care and maintenance guidelines, and our limited warranty.
95































   93   94   95   96   97